모듈:UserLinks/config

모듈 설명문서[만들기]

--------------------------------------------------------------------------------
--                            UserLinks configuration                         --
-- This module provides configuration and localisation messages for           --
-- [[Module:UserLinks]]. See the comments in the code below for explanations  --
-- of what each message does.                                                 --
--------------------------------------------------------------------------------

local cfg = {} -- Don't edit this line.

--------------------------------------------------------------------------------
--                                Display values                              --
-- These messages are the display values for the user links. These are the    --
-- most visible messages in the module. They should be short, but             --
-- descriptive. Spaces are automatically escaped with  , so there is no  --
-- need to add any &nsbp; values here.                                        --
--------------------------------------------------------------------------------

-- The user talk page.
cfg['display-talk'] = '토론'

-- The user's contributions.
cfg['display-contributions'] = '기여'

-- The user's edit count, using the edit count tool on WMF Labs.
cfg['display-count'] = '횟수'

-- Log of the user's page moves.
cfg['display-moves'] = '문서 이동'

-- All the user's logged actions.
cfg['display-logs'] = '기록'

-- The user's block log.
cfg['display-blocklog'] = '차단 기록'

-- Blocks that the user has performed.
cfg['display-blocks'] = '차단한 내역'

-- Link to the interface where the user can be blocked.
cfg['display-blockuser'] = '사용자 차단'

-- CentralAuth, the global account manager for the user.
cfg['display-centralauth'] = '통합 계정'

-- The user's deleted contributions.
cfg['display-deletedcontributions'] = '삭제된 기여'

-- Likn to email the user.
cfg['display-email'] = '이메일'

-- Analysis of the user's edit summaries, using the tool on WMF Labs.
cfg['display-editsummaries'] = '편집 요약'

-- Deletions that the user has performed.
cfg['display-deletions'] = '삭제'

-- The user's entry on [[Special:ListUsers]].
cfg['display-listuser'] = '사용자 목록'

-- A display of the user's global contributions, using the sulutil: interwiki
-- prefix.
cfg['display-sul'] = '글로벌 기여'

-- All logs of actions performed on the user or their user page.
cfg['display-targetlogs'] = '대상 기록'

-- Log of times the user has triggered the AbuseFilter (also known as the
-- edit filter).
cfg['display-abuselog'] = '필터 기록'

-- Page protections that the user has performed.
cfg['display-protections'] = '보호'

-- Log of rights changes that the user has performed.
cfg['display-rights'] = '권한'

-- Log of username changes that the user has performed.
cfg['display-renames'] = '이름 변경'

-- Link to a list of the user's requests for adminship.
cfg['display-rfa'] = '관리자 선거'

-- Data about the user from the MediaWiki Web API.
cfg['display-api'] = 'api'

-- List of the user's local file uploads.
cfg['display-uploads'] = '올리기'

--------------------------------------------------------------------------------
--                                  Page names                                --
-- Page names used in formatting some of the user links.                      --
--------------------------------------------------------------------------------

-- The base page for a request for adminship link. This assumes that the link
-- is of the format [[Base page/username]]. If your wiki uses a different
-- format, consider adding a new link at [[Module:UserLinks/extra]], or you can
-- leave a message at [[w:en:Template talk:User-multi]] to ask the module
-- developers how best to deal with it.
cfg['page-rfa'] = '위키문헌:관리자 선거'

--------------------------------------------------------------------------------
--                                Error messages                              --
-- The following are error messages that may occur when the module is run.    --
-- These are the more common error messages that are localisable; other,      --
-- rarer error messages may be raised from other modules or directly from     --
-- Lua. The messages ending with "section" are the section names on a help    --
-- page that give advice to users who encounter the error. The help page is   --
-- defined in the 'error-config-message-help' message.                        --
--------------------------------------------------------------------------------

-- The module didn't detect a username from the "user" or "User" parameters.
-- This could be because no username was specified, or because the user used a
-- positional parameter and their username contains an equals sign,
-- e.g. {{user|John=Smith}}, rather than {{user|1=John=Smith}}.
cfg['error-nousername'] = '사용자 이름을 찾지 못했습니다'
cfg['error-nousername-section'] = ''

-- The input to the "project" or "Project" arguments wasn't a valid interwiki
-- prefix or a valid language code. $1 is the code that was input to the module.
cfg['error-invalidproject'] = '올바른 프로젝트 또는 언어 코드가 아닙니다: "$1"'
cfg['error-invalidproject-section'] = ''

-- The input to the "lang" or "Lang" arguments wasn't a valid interwiki
-- prefix or a valid language code. $1 is the code that was input to the module.
cfg['error-invalidlanguage'] = '올바른 언어 코드가 아닙니다: "$1"'
cfg['error-invalidlanguage-section'] = ''

-- The user didn't specify any link codes. This is only an error when using the
-- "single" function to return a single link; the "main" function includes a
-- user page link by default.
cfg['error-nolinkcode'] = '링크 코드가 지정되지 않았습니다'
cfg['error-nolinkcode-section'] = ''

-- The link code passed to the module was malformed. This means it was either
-- not a string value or it was the blank string.
cfg['error-malformedlinkcode'] = '잘못된 링크 코드가 감지되었습니다.'
cfg['error-malformedlinkcode-section'] = ''

-- No link function exists for the code specified, so the module cannot make
-- the link. $1 is the code that was passed to the module.
cfg['error-invalidlinkcode'] = '올바른 링크 코드가 아닙니다: "$1"'
cfg['error-invalidlinkcode-section'] = ''

-- The snippets table was accessed, but there was no value for the key it was
-- accessed with. This is not usually visible by end users; it is probably a
-- mistake in one of the link functions in [[Module:UserLinks/extra]]. $1 is the
-- key that was passed to the module.
cfg['error-nosnippet'] = '해당 키에 대한 정보가 없습니다: "$1"'
cfg['error-nosnippet-section'] = ''

--------------------------------------------------------------------------------
--                             Error configuration                            --
-- Configuration for the display of the error messages.                       --
--------------------------------------------------------------------------------

-- The error message used when a section link is available. $1 is the error
-- message, and $2 is the name of the section.
cfg['error-config-message-help'] = '사용자 링크 오류:'
	.. ' $1.'

-- The error message used when ano section link is available. $1 is the error
-- message.
cfg['error-config-message-nohelp'] = '사용자 링크 오류:'
	.. ' $1.'

-- The name of the error category. Pages are put in this category if any errors
-- are encountered.
cfg['error-config-category'] = '사용자 링크 끼워넣기 오류'

--------------------------------------------------------------------------------
--                               Snippet defaults                             --
-- Some of the snippets require default values when the user doesn't specify  --
-- "project" or "lang" arguments. Those default values are stored here.       --
--------------------------------------------------------------------------------

-- The short project interwiki prefix.
cfg['snippet-project-default'] = 'w'

-- The long project interwiki prefix.
cfg['snippet-projectlong-default'] = 'wikipedia'

-- The MediaWiki language code for the wiki.
cfg['snippet-lang-default'] = 'ko'

--------------------------------------------------------------------------------
--                              Link table headers                            --
-- The headers used in the table of links used on documentation pages.        -- 
--------------------------------------------------------------------------------

-- The link code.
cfg['linktable-codeheader'] = '코드'

-- The link preview.
cfg['linktable-previewheader'] = '미리보기'

--------------------------------------------------------------------------------
--                              End configuration                             --
--------------------------------------------------------------------------------

return cfg -- Don't edit this line.